5 Axis Jog-Learn Spinning Lathe Mach3 in action
by Lathe on Feb.06, 2010, under Lathe Videos
This is a vidio of a 5 Axis Jog-Learn Spinning Lathe that I designed and built the Conttrol system with Mach3. It has custom Scrrens, Custom Plugin, Macropump, dual function pendant with 2Z-bot mpgs, or you can select a 2 axis jog ball for compound curves, you can run 2 axis at the same time for programming. It records all your moves on all 5 axis. X, Z is standard lathe, A/B is 8 tool turret and angle of attack, Y is the backer wheel for Flanging. The Drives are Automation Direct sureservo, it has 2 bob’s One from cncbuildingblocks and one from CNC4PC. Vic Russel of “Russels Metal Spinning” commisioned me for the Control system. The Crew at Russels metal spinning are responsible for the physical/Mechanical machine build, in which they did and excellent job. If you need a Control system, by all means contact me at SS Systems, LLC or poppabear at the www.Machsupport.com forum site. Scott
Popularity: 2% [?]
Related posts:
- Metal Spinning Lathe CNC Automatic This is a custom built spinning lathe used to...
- CNC Spinning Lathe “Clip-On” Console for Automating Manuals This is a SeriesII CNC Spinning Console designed to...
- Lathe 4th Axis Lowrider Milling down the old 7×10 lathe to save some...
- Diamond 42CSL 10-Axis Swiss-Type Lathe Factory Spy Video The Diamond 42CSL is a huge 42mm, 10-axis Swiss-type...
- Duality Lathe 4th Axis: Tormach Engineering Sneak Peak Matt D. talks about the design of Tormach’s Duality...
Leave a Reply
-
Welcome to HandLathe.com - Lathe Products and Blog!
Thanks for dropping by! Feel free to join the discussion by leaving comments, and stay updated by subscribing to the Lathe Forum.
February 6th, 2010 on 2:39 pm
i personally have spun thousands upon thousands of light reflectors on that very machine. Its built like a brick shit house and is just amazing at the prodution i could make with it.
February 6th, 2010 on 2:39 pm
Shep,
It is a Spinning Lathe.
scott
February 6th, 2010 on 2:39 pm
that is nutty.. are you pushing the maternal? there is no chips, so you cant be cutting?
February 6th, 2010 on 2:39 pm
º¤ø„¸¸„ø¤º°¨¸„ø¤º°¨ post to 9 other vids
¨°º¤ø„¸ Copy „ø¤º°¨ press F5 twice
¸„ø¤º°¨Paste “°º¤ø„¸ OK
¸„ø¤º°¨¸„ø¤º°¨¨°º look at ur background
February 6th, 2010 on 2:39 pm
indyraza:
I just built the control system, The owner and crew of Russels metal spinning built the mechanical machine. I think he estimates he has about 60K in the machine, since it is a “Commercial Grade” prototype. Having built this one, he thinks knowing what he knows now he would build it for about 30K, and that includes labor.
scott
February 6th, 2010 on 2:39 pm
What did that lathe cost you about?
February 6th, 2010 on 2:39 pm
Good job. I bet your happy with Scott and the setup and especially the price. In these days it good to see the little bloke getting into the realms of where the big boys are and not having to pay 10’s of thousands of dollars for. Plus you can make what you want and not what someone thinks you want. Have fun with the nice machine.
Rich.