HandLathe.com – Lathe Products and Blog

A discussion on the various parts of a SB lathe apron.

Popularity: 2% [?]

After being kind of chalenged I thought I would give turning a nose cone on the lathe with my ball turning tool a go… here is the result. What do you think?

Popularity: 4% [?]

Watchmaker clockmaker jewelers lathe course. www.ticktockpro.com. This lathe course is for the beginner watchmaker, clockmaker, hobbyist or home machinist. There is no prerequisite for this lathe course. You don’t even need to own a lathe! This course will teach you what is needed when buying a jewelers lathe. How to recognize a good or bad lathe. What is the right lathe for you. Where to buy a jewelers lathe. What you need in a lathe, and how each part should correctly function. What parts …

Popularity: 1% [?]

Introduction to the bench top lathe. Vdo features set up of material and tools. Discusses safety and operating procedure for facing, turning and drilling. See part 1 also. Video used for introduction to lathe in the junior high school metal program at Vancouver technical.

Popularity: 5% [?]

Introduction to the bench top lathe. Vdo features set up of material and tools. Discusses safety and operating procedure for facing, turning and drilling. See part 1 also. Video used for introduction to lathe in the junior high school metal program at Vancouver technical.

Popularity: 17% [?]

A brief review of the Lathemaster 9 X 30 lathe. Although I’ve not had a chance to put this lathe through its paces, it looks like this is a *very* well built lathe and is far beyond the average Asian home machine shop lathe. I’ll have more reviews as I get to use the machine more.

Popularity: 2% [?]

Shows set up and machining of pipe in preparation for using a steady rest. Filmed in our shop Oct 2008. This is a project for my home–(Trying to keep the vehicles off my fence.) Keaton Morris assisted me, he is one of my machinist students. This VDO is a rare posting of advanced techniques. I will not be posting many of my advanced vdo’s– those are for vantech school use only. This VDO is here to entice those to become a machinist. Knowledge of Set up and operation is what makes machinists …

Popularity: 2% [?]

A device I designed and built to aid in the drilling of very small diameter holes on my 9×20 lathe without breaking the drill bit! The original idea was formed after watching a video by Gmark1953 ‘drilling an orifice on the lathe’ I just thought the holding of the pin vice a little risky!

Popularity: 5% [?]

A DC-powered Taig lathe run through the full speed range. More about this at: www.ModelEngines.info

Popularity: 2% [?]

Clockmaker watchmaker jewelers lathe course. www.ticktockpro.com. Many people use their lathes for polishing clock parts, watch parts and tools. Most of the time, it sits on the shelf. They know their lathes can do much more, but they don’t know where to start in order to learn the needed skills and techniques to get more out of their lathes. This course will teach you various techniques and skills to learn and unlock the numerous possibilities within your jewelers lathe. In this course, you …

Popularity: 1% [?]