HandLathe.com – Lathe Products and Blog

8 axis complex bar working CNC lathe with sub spindle and live tools. Multi-axis gang tooling lathe with independant machining on both main and sub spindle.42mm bar capacity Available as package including bar feeder

Popularity: 2% [?]

Tubalcain demonstrates the actual grinding of a lathe tool bit. This the last of 4 videos on the subject.

Popularity: 2% [?]

Now more than ever, your cycle times count! Production times need to be reduced with multi-tasking machining in order to stay competitive. In this video you will see a demonstration of a simple setup run from raw hardened steel bar stock to finished component. The Nakamura WT-100 is a popular machine offering a compact footprint with enough muscle behind it to get the job done. Visit us at www.methodsmachine.com for more information!

Popularity: 1% [?]

Tubalcain explains the angles of a 60 degree tool bit which will be used to cut threads on a lathe. Also covered are several different types of commercial threading tools such as ALORIS & ARMSTRONG.

Popularity: 3% [?]

My first go at a steam engine (run on air at this time) It is made from the plans by Elmer for the Baldy engine. Similar in build to his little wobblers,but uses the part spherical piston to create the wobbling action. I have slightly modified the build to suit my taste but have kept the heart of the plan intact. It runs from 5psi to 30psi and could be better once it is run in. the flywheel and piston were made with the use of the Ball turning tool designed by Steve Bedair. (Máquina de vapor …

Popularity: 2% [?]

Updated video of the GTV-42 Gang-Tool Lathe that was uploaded here: www.veoh.com This version of the video is color corrected and has brightness adjusted.

Popularity: 2% [?]

www.glacern.com Glacern Machine Tools Mass production turning of a part. Material is 1.0″ diameter 12L14 bar stock. The original part was made of S7 tool steel, but required coolant. The machine is a Mori Seiki NL2500SY-700 CNC Turning Center with a Y-axis, C-axis on both spindles, live tooling, and a subspindle.

Popularity: 2% [?]

THIS VIDEO IS OF ME PERFORMING THE LAST SET OF CUTS TO FINISH MY NEW FLY CUTTER ARBOUR FOR OUR BRIDGEPORT MILL….NOW I’LL BE ABLE TO CRANK THE SPEED UP A BIT AND NOT WORRY ABOUT ALL THE VIBRATION PROBLEMS CAUSED BY THE PIECE OF SHITE I’M STUCK WITH AT THE MOMENT!!!THE CURRENT TOOL IS A TIPPED LATHE TURNING TOOL WELDED TO A STUB THAT WE HOLD IN A COLLET ON THE MACHINE….WHEN TRYING TO SKIM A CYLINDER HEAD THIS REALLY IS LESS THAN SATISFACTORY…IT IS NOT GOOD FOR THE PROCEDURE AND IS …

Popularity: 3% [?]

www.glacern.com Glacern Machine Tools Turning a rook chess piece out of 2.5″ diameter 6061 aluminum bar stock on a Mori Seiki NL2500SY-700 CNC Turning Center, utilizing the Y-axis, C-axis, and live tooling.

Popularity: 4% [?]

OVERVIEW: This application note covers an interesting application of the Tormach PCNC 1100 milling machine. This video has been posted by Tormach. The original author is SDM Fabricating (www.sdmfabricating.com) and is published here with permission of the author. For more information about Tormach CNC machinery please go to our website at http COMMENTS from the Author (SDM Fabricating): For very little investment you can make a tool holder and use your mill as a vertical lathe with indexable …

Popularity: 1% [?]